5G Mobile connections are an ideal backup infrastructure for fixed WAN services. Unfortunately, however, corporate routers are not usually equipped to handle them, or are installed in poorly accessible locations and hence coverage is poor. Teldat-5Ge is the solution to this problem because it connects the corporate router to mobile networks easily, economically and non-intrusively.
Teldat-5Ge integrates 5G mobile connectivity and can be installed wherever there is adequate network coverage, using Ethernet high speed port to connect to the corporate router.
No configuration required, just connect to Ethernet and it´s ready to go. If PoE+ is enabled, you only need the Ethernet cable; if not, you'll need to plug it.
The device uses auto provisioning to download the configuration (similar to an IP phone) from the office router.
The router controls the mobile connection, applying the same connection, security and QoS policies used for the fixed connection.
The 5Ge, unlike other devices, is capable of meeting all the EN-DC band combinations and DSS requirements that 5G-NSA networks usually need.
Description
Teldat-5Ge is the fastest, most effective and versatile solution for the new 5G mobile connectivity.
Mobile networks are unquestionably the ideal backup connectivity solution where wired networks are unavailable. However, corporate routers are not usually prepared to handle a wireless connection or are housed in locations where mobile network coverage is lousy. Teldat-5Ge provides the solution to these problems. The compact design of the device makes it ideal for placing inside the office for optimum coverage and it connects to the corporate router via Ethernet.
The existing corporate router directly controls the mobile connection and integrates it with security, QoS and network management policies (Teldat-5Ge can operate as a standalone device).
With automatic provisioning and Power over Ethernet support, Teldat-5Ge can be efficiently and securely installed in just a few minutes, without requiring qualified personnel.
Ensuring connectivity for a corporation's office is essential. While redundant copper or fiber connections are useful, different fixed access methods often share the same infrastructure which means there is a chance they might fail at the same time. By contrast, mobile networks use air as a medium and a different infrastructure to fixed networks. This, together with the high level of efficiency of 5G networks in terms of latency and speed, make them the ideal backup system or even as the main connection for offices.
Teldat-5Ge is a 5G device that provides a non-intrusive way to enable mobile access in corporate routers that do not natively support mobile connections or that are installed in communications cabinets with poor coverage. Teldat-5Ge is a peripheral device that works with the router to secure and maintain control over the communications. It can also operate as a standalone device.
The router that manages the fixed connections also controls the mobile connections and therefore enforces the same security and QoS policies.
Teldat-5Ge does not store the configuration but it receives it via DHCP during startup. This means that you do not need to do anything on the device before physically installing it.
With Power over Ethernet+ support (a PoE+ injector is available for non-PoE+ switches) it can be powered simply using a single Ethernet cable making installation quick and easy.
The device goes unnoticed in work/transit areas thanks to its compact size and elegant design.
The setup process implies standard features. A VLAN is used to set up the data connection between the router and the Teldat-5Ge, creating what is, for all intents and purposes, a virtual interface on the router.
The device can be managed from the existing router, so you do not need to reserve an address for managing the device or register it on the management systems.
Designed to be mounted on a wall to get the best signal strength.
In "router mode" the Teldat-5Ge is a standalone solution that provides copper and 5G WAN connectivity to remote offices.
Read our latest Blog Posts
Heat pipes transfer heat on electronic devices & industrial applications, using the heat transition principle, to transfer to heat sinks within a cooling system. Heat pipes have clear advantages over other heat dissipation methods. What are heat pipes? Heat pipes...
There is a clear trend in the electronics industry for integration, allowing for more compact and efficient designs. More and more, electronics manufacturers are making their chips smaller, including more components within their chips and extending the feature range....
In a previous article we looked at how to mathematically calculate the reliability of electronic equipment. That is, the probability of it working correctly for a given period of time. This is best characterised by the Mean Time Between Failure (MTBF), or its...
powered by Borlabs Cookie